TM 10-3510-222-24
12-64. DOOR.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Materials /Parts
Sealing Compound (App D, Item 5)
Gasket (App C, Item 61)
Personnel Required
Two
Equipment Condition
Dryer shut down (TM 10-3510-222-10)
General Safety Instructions
WARNING
Voltage in this equipment is high
enough to cause serious injury or
death. Do not perform this task with
power on
a. REMOVAL
(1) Remove roll pin (1).
(2) Support door (7) and punch out hinge pin (2) from bottom up. Remove door (7).
(3) Remove screw (5) and lockwasher (6) from collar (4).
(4) Unscrew setscrew (3) and remove collar (4) from hinge pin (2).
(5) Remove nut (8), screw (9) and handle (10) from door (7).
(6) Remove gasket (11) from door (7).
(7) If required, remove two screws (12) and arrow (13).
b. REPAIR
Repair consists of replacing damaged or missing components of the door.
c. INSTALLATION
(1) If required, position arrow (13) on door and secure with two screws (12).
(2) Cut gasket (11) material to size.
(3) Apply adhesive to door (7).
(4) Install gasket (11) on door (7).
(5) Install handle (10), screw (9) and nut (8).
(6) Position door (7) on dryer and insert hinge pin (2). Secure with roll pin (1).
(7) Install lockwasher (6) and screw (5) on collar (4) and position collar (4) on top of pin (2).
(8) Secure collar (4) to top of pin (2) with setscrew (3).
(9) Adjust door switch (Para 2-65).
2-150
