TM 10-3510-222-24
2-66. DISCHARGE SPOUT.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
General Safety Instructions
General Mechanics Tool Kit (App B, Item 1)
Equipment Condition
WARNING
Exhaust Adapter removed (Para 2-68)
Voltage in this equipment is high enough to cause
serious injury or death. Do not perform this task
with power on
a.
REMOVAL
(1)
Remove four nuts (1), lockwashers (2) and screws (3).
(2)
Remove four screws (4) and lockwashers (5).
(3)
Remove spout and duct (6) from dryer base.
(4)
Remove nut (7), lockwasher (8), screw (9) and chain (10) from spout and duct (6).
(5)
Disconnect S-hooks (11 and 12) from chain (10) and separate pin (13) from S-hook (12).
b.
REPAIR
Repair consists of replacing damaged or missing components of the discharge spout.
c.
INSTALLATION
(1)
Connect S-hook (12) to pin (13) and chain (10).
(2)
Connect S-hook (11) to other end of chain (10).
(3)
Attach S-hook (11) to spout and duct (6), using screw (9), lockwasher (8) and nut (7).
(4)
Position spout and duct (6) on dryer base and secure with four screws (4) and lockwashers (5) and
four screws (3), lockwashers (2) and nuts (1).
(5)
Install exhaust adapter (Para 2-68).
2-155
