TM 10-3510-222-24
2-76. CONNECTOR-SWITCH.
This task covers:
a.
Removal
b.
Repair
c.
Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanics Tool Kit (App B, Item 1)
Centrifugal Pump Unit removed
Automotive Vehicle Shop Equipment (App B,
(TM 10-3510-222-10)
Item 2)
Materials/Parts
Straight Connector (App C, Item 2)
Gasket (App C, Item 62)
Tags (App D, Item 4)
a.
REMOVAL
(1)
Remove six screws (1), cover (2) and gasket (3) from switch box (4).
(2)
Tag and remove electrical wiring from switch (5) and receptacle (6).
(3)
Remove nut (7), connector (8), washer (9) and wiring from switch box (4).
(4)
Remove two nuts (10) and screws (11) from switch box (4) and remove switch box (4) from frame (16).
b.
REPAIR
(1)
Repair consists of replacing damaged or missing components of the connector-switch.
(2)
Receptacle (6).
(a)
Remove two screws (12) from receptacle (6).
(b)
Tag and disconnect electrical wiring from receptacle (6).
NOTE
Wire numbers are stamped on each electrical wire. This
information, in conjunction with data on FO-5 Centrifugal Pump
Unit Wiring Diagram, may be used to connect wires if tags are lost
or illegible.
(c)
Install wiring on new receptacle as tagged (6).
(d)
Install receptacle (6) in cover (2) with two screws (12).
(3)
Switch (5).
(a)
Remove four screws (13) and cover (14).
(b)
Remove two screws (15).
(c)
Tag and disconnect wiring from switch (5) and remove switch.
2-172
