TM 10-3510-222-24
3-67. PLUG-IN RELAY.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit (App B, Item 1)
Materials/Parts
Tags (App D, Item 4)
Equipment Condition
Laundry Unit shut down (TM 10-3510-222-10)
Door open (Para 2-71)
General Safety Instructions
WARNING
Voltage in this equipment is high enough
to cause serious injury or death. Do not
perform this task with power on.
a.
REMOVAL
NOTE
This procedure covers the replacement of timing relay K4. Relay K3 is replaced in a similar
manner.
(1)
Pull out plug-in relay (1).
(2)
If replacement of relay socket (4) is required, proceed as follows:
(a)
Tag and remove wires from relay socket (4).
(b)
Remove screws (2), lockwashers (3) and relay socket (4).
b.
INSTALLATION
(1)
If removed, position relay socket (4) on dryer and secure with screws (2) and lockwashers (3).
NOTE
Wire numbers are stamped on each electrical wire. This information, in conjunction with data on
FO-4 Dryer Wiring Diagram, may be used to connect wires if tags are lost or illegible.
(2)
Connect wires as tagged.
(3)
Line up pins of relay (1) with holes in relay socket (4) and push in on relay (1) until it is firmly
seated.
(4)
Close door (Para 2-71).
3-154
