TM 10-3510-223-13&P 0005 00
0005 00-52
PACKING CSSL FOR RETURN SHIPMENT
Before packing the CSSL container for return shipment, ensure that the inside has been swept clean and
excess water has been mopped off. Retrieve dryer exhaust caps from the footlocker and install onto
external dryer exhausts.
WARNING
The CSSL components are heavy. To avoid injuries, observe the lift
requirements shown in the table below.
Pack the CSSL components into the container in the condition indicated in the packing list below and
position as shown in the following illustration. Retrieve tie-down straps from footlocker and secure items
as shown. Place the technical manual into footlocker. Close and secure all doors.
Nomenclature
Quantity
Condition
Lift Requirements
100AMP Cable, 50ft
2
Clean, coiled, caps installed
2 Persons each Cable
TEMPER Frame Section Cover
1
Clean and folded
4 Persons
TEMPER, 8-ft Window Section
1
Clean and folded
4 Persons
TEMPER End Section
1
Clean and folded
4 Persons
TEMPER Modified End Section
1
Clean and folded
4 Persons
Fresh Water Supply Hose 1 ½”
1
Drained and coiled
2 Persons
Wastewater Drain Hose 2”
1
Drained and coiled
2 Persons
Ground Rod
1
Clean, with wire attached
1 Person
Ventilation Fan
1
Cord Plug taped to body
2 Persons
Wastewater Tank 3,000 Gallon
1
Drained clean and folded
4 Persons
Freshwater Tank, 3,000 Gallon
1
Drained clean and folded
4 Persons
Table, Folding
4
Folded and tied
1 Person each table
Portable Fluorescent Light Assy
1
In Case
1 Person
Tie Down Straps
4
Secured to floor provisions
1 Person
Footlocker, containing:
1
1 Person
Garden Hose
1
Drained, coiled, ends connected
Technical Manual
1
In plastic bag
120 VAC Power Cord
1
Clean and coiled
Adjustable Wrench
1
Clean
Flash Light
1
Clean
Washer/Dryer Repair Parts
Original Pack
WARNING
The CSSL container weighs approximately 10,000 pounds when packed.
Lift and move the container only with material handling equipment of at
least 10,000 lbs capacity. If forklift is used, lift at outside pockets. Never
stand under a CSSL container when it is being lifted.
Using a 10,000 lbs forklift or other lifting device, move and lift CSSL onto conveyance for shipment.
