TM 10-3510-223-13&P
0031 00
0031 00-6
Install Connectors.
NOTE
Electrical contact pins should not separate from conductors (wires) when
subjected to a pull out load test of 8 lbs.
Crimp electrical wires securely to contact pins (1) of connector (2) as tagged. If not tagged, connect as
follows: Phase A – Black wire, Phase B – Red wire, Phase C – Blue wire, Neutral – White wire, Ground –
Green wire. Slide connector into sleeve (3) and secure with retainer ring (4). Install power entry box rear
panel cover (5). Install front of power distribution panels #1 and #2.
1
2
3
4
5
