TM 10-3510-223-13&P
0033 00
0033 00-3
Install
Remove dust cover (1) and inner cover (2) from the new fixture (3).
Install mounting brackets (4) onto new fixture, using the hex nut (5), screw (6), and retainer plate (7)
removed from old fixture.
Pass the white, black, and green ground wire through the fixture conduit connection (8).
With second person holding the mounting brackets (4) and fixture (3) over the ceiling bracket studs (9)
and install hex nuts (10) and washers.
Secure conduit to fixture with hex retainer nut (11).
Connect black and white wires (12). (Wire connectors may be screw caps, or crimp type, and vary with
different light fixtures)
Connect ground wire (13) to fixture. Replace inner cover (2) and secure it with retainer.
If new light bulbs are to be installed, place the insulators (14) removed from the old light bulbs onto the
new bulbs so that the slotted end faces down and outward from the bulb. Install light bulbs (15) and
secure with clips (16).
Replace dust cover (1).
Place Circuit Breaker #1 on Circuit Breaker Panel #1 to ON position.
