TM 10-3510-224-13&P
0022 00
UNIT MAINTENANCE
CONTAINERIZED SELF SERVICE LAUNDRY (CSSL)
NSN 3510-01-485-0457
WASHER AND DRYER
INSPECT
INITIAL SETUP:
Equipment Condition
CSSL in operation
Materials/Parts
Wiping Rags (WP 0070, Table 1, Item 1)
Tools and Special Tools
Tool Kit, General Mech. Automotive (WP 0042, Table 2,
Item 1)
Personnel Required
One
INSPECT
1. Inspect each of the six washers/dryers (1) for damage.
2. Check the power cords (2) for cuts or fraying, and any broken twist-lock connectors (3).
3. Check the condition of the freshwater (4) and drain hoses (5). Tighten the hoses if necessary.
4. Check the condition of the dryer exhaust hoses (6). Tighten the hose clamps (7) if necessary. Report the
replacement of a crushed, torn, or ripped hose to direct support maintenance. Confirm that the washer/dryer
assemblies are mounted (8) securely. It will be necessary to slide the washer (lower) unit out on its frame to gain
access to the mounting hardware (8). Report an inoperative washer/dryer to direct support maintenance.
6
7
5
1
3
8
4
8
8
2
END OF WORK PACKAGE
0022 00-1/(2 Blank)
