TM 10-3510-226-23
0038 00
REPLACE-CONTINUED
WARNING
The pump assembly is a two-man lift. Serious injury to personnel can result if proper
safety precautions are not observed. Failure to comply may cause serious injury to
personnel.
8. Remove bolts, washers, and nuts (Figure 11, Item 13) securing pump to pump mount, and remove
pump.
9. Install replacement pump (Figure 11, Item 2) and retain with bolts, washers, and nuts.
10. Install new gaskets on inlet and outlet flanges (Figure 11, Item 12).
11. Attach inlet and outlet flanges (Figure 11, Item 12) to replacement pump (Figure 11, Item 2) and
retain with bolts, washers, and nuts.
12. Install vent hose (Figure 11, Item 9).
13. Remove screws retaining cover to pump junction box (Figure 11, Item 1) and remove cover.
14. Knock out conduit penetration if necessary.
15. Install conduit (Figure 11, Item 8) onto replacement pump motor (Figure 11, Item 2) and retain with
locknut.
16. Connect wiring to pump as tagged.
17. Install cover to pump junction box (Figure 11, Item 1) and retain with screws.
0038 00-14
