TM 10-3510-226-23
UNIT MAINTENANCE
CONTAINERIZED BATCH LAUNDRY
NSN 3510-01-527-2209
NSN 3510-01-527-2210
TUBE, LEVEL SENSING
INSPECT, SERVICE, REPLACE
INITIAL SETUP
Tools
Personnel Required
Shop Equipment, Automotive Maintenance and
Quartermaster and Chemical Equipment Repairer 63J
Repair: Organizational Maintenance, Common
(2)
No.1 (WP 0086 00, Table 2, Item 5)
Equipment Condition
Materials/Parts
Tie, Wire, 6.3 in (WP 0087 00, Item 55)
CBL set up
References
INSPECT
Inspect the Level Sensing Tube
WARNING
Ensure that all electrical power is shut off and disconnected before proceeding. The
Circuit Breaker box should be locked by personnel following this procedure. Serious
injury or death can result from electrocution if proper safety precautions are not observed.
WARNING
The washer is extremely heavy. Use caution when lifting and blocking the washer, and
do not allow unnecessary personnel in the immediate area while it is being moved.
Serious injury or death may result if safety precautions are not observed.
CAUTION
The washer is a large, heavy piece of machinery being moved out of a confined space.
Before removal and installation, remove or protect any equipment which might be
damaged by the washer on its way in or out.
1. Remove washer IAW procedures given in WP 0041 00.
2. Inspect the level sensing tube (Figure 1, Item 1) for material damage, wear, pinching, and proper
connection.
3. Install washer IAW procedures given in WP 0041 00.
