Figure 4-36. Water heater control panel box with cover removed.

TM-10-4510-201-14 - index
Page Navigation
82

Figure 4-36. Water heater control panel box with cover removed.

(d) Remove the locknut (1, fig. 4-36)

e. Water Heater Control Panel Box.

that attaches the pressure and temperature control (12,

(1) Removal.

fig. 4-22) to the panel box (4).

(a) Refer to paragraph 4-27a (2), and

(e) Remove the conduit nuts (2 and 3,

remove the circuit breaker subassembly.

fig. 4-36) that attach the conduits to the panel box.

(b) Refer to paragraph 4-40c (2), and

(f) Remove the box connector (4) that

remove the control box receptacle connector.

attaches the solenoid valve to the panel box.

(c) Disconnect the two wires connected

(g) Remove the nuts and screws that

to the pressure and temperature control.

attach the water temperature gage bracket to the panel

NOTE

box, and separate the bracket from the panel box.

Tag the wires for identification if

(h) Remove the nuts (9) and the ground

color-coded wires are not used.

wire from the capscrews that hold the panel box to the

panel box bracket (11, fig. 4-22).