TM 10-4510-207-14
SECTION III OPERATOR MAINTENANCE PROCEDURES
3.1. Y-FITTING COUPLER REPLACEMENT.
This task covers: a. Removal b. Installation
INITIAL SETUP
Equipment Conditions:
Shower facility not in use.
Both pump assembly switches in the OFF position,
Refer to figure 3-1.
a. Removal. Release quick disconnect coupling (1) and separate drain hoses (2) from Y-fitting coupler (3).
b. Installation. Connect drain hoses (2) to Y-fitting coupler (3) and secure using quick disconnect
couplings (1).
3-4
