TM 10-4510-207-14
d.
Assembly.
(1) Be sure any defective, missing, or damaged components have been replaced.
(2) Apply sealing compound to threads of coupling (14) and install into shower base (15).
(3) Install cap (3).
(4) Install ring (11) and chain (12).
(5) Install two tube liners (10) and secure using four screws (9).
(6) Install four tube liners (8) and secure using 12 screws (7).
(7) Install two each hook fastener strips (5 and 6) and secure using 30 flat washers (4) and screw (3).
(8) Install grate (2) and secure using four screws (1).
e.
Installation.
(1) Assemble shower facility as necessary. See paragraph 2.6.
(2) Start up the shower facility. See paragraph 2.7.
4-11
