TM 10-4510-208-13&P
0035 00
26. Install handle (5), screw (6), and cover (4).
NOTE
Install showerhead hand tight only. Use anti-seize tape if necessary.
27. Install collar (10) and shower head (9).
28. Repeat steps 24 through 26 as necessary for additional shower valves.
12
10
9
11
8
7
5
6
4
29. Install the fascia plates (9) and plumbing as an assembly.
30. Secure the fascia plates with 36 screws (10).
CAUTION
Always use two pipe wrenches when tightening or loosening a pipe union. Use one pipe
wrench to turn the larger union ring, and another to secure the pipe attachment. Failure
to do so can twist the union on the pipe, damaging both.
31. Reattach the two unions on each end of the plumbing (four total).
32. Replace the shave stand water connection cover.
33. Connect shower water supply and inspect for leaks.
0035 00-13
