TM 10-4510-208-13&P
UNIT MAINTENANCE
CONTAINERIZED SHOWER
(NSN 4510-01-477-7763)
SHOWER, ENCLOSED UNIT, SYSTEM
(NSN 4510-01-470-1398)
SUMP PUMP TANK
SERVICE
INITIAL SETUP
Tools
Personnel Required
Garden Hose (Item 1, WP 0048 00)
Two
Shop Equipment Automotive Maintenance and
Repair: Organizational Maintenance, Common
Equipment Condition
No. 1 (Item 4, WP 0048 00)
Containerized Shower / Shower, Enclosed Unit,
System set up.
Materials/Parts
Bleach (Item 6, WP 0075 00)
Brush Sanitary (Item 8, WP 0075 00)
Detergent (Item 13, WP 0075 00)
SERVICE
Clean the Graywater Holding Tank
NOTE
When the shower is in operation on a more or less daily basis, the graywater tank must
be cleaned approximately every 30 days. To prepare the tank for cleaning requires two
persons. The graywater tank on the Containerized Shower may be easier to access by
opening the service doors. The Shower, Enclosed Unit, System, does not have service
doors, and must be accessed from the interior of the shower.
1. Remove the screws (1) securing the equipment mounting platform (2) and the padeyes (3) to the
mounting rails (4) (Containerized Shower only).
WARNING
The equipment mounting platform is heavy, awkward, and difficult to maneuver. Wear
protective gloves before handling. To prevent injury, two persons are required to remove
and carry it. Failure to observe safety precautions may result in serious injury to
personnel.
WARNING
The equipment mounting platform has sharp edges or corners. Wear protective gloves
before handling. Failure to observe safety precautions may result in serious injury to
personnel.
2. Lift the equipment mounting platform (2) and place it outside the shower container (Containerized
Shower only).
3. Remove the bolts securing the graywater tank cover plates (5) and duct cover plates (6) in place, and
remove the plates.
0036 00-1
