TM 10-4510-209-13&P
0030 00
Table 6. Sump Pump Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Remove access panel, and
Step 1. Check sump pump cord
1. SUMP PUMP DOES NOT
reinsert pump plug into pump
(2) connection.
OPERATE
receptacle.
Replace a defective receptacle.
Step 2. Test pump receptacle (3)
Refer to WP 0047 00.
IAW WP 0047 00.
Replace a defective switch.
Step 3. Check pump switch (1)
Refer to WP 0044 00.
IAW procedures given in WP
Step 4. Inspect pump (4) suction.
WARNING
Protective clothing and
equipment must be worn.
Heavy-duty rubber apron,
rubber gloves, safety splash
goggles and/or face shield
are required when potential
exists for contact with
wastewater or contaminated
surfaces. Wastewater and
surfaces may be
contaminated with
pathogenic microorganisms,
bacteria or viruses, which
present a risk of serious
illness or death to
personnel.
Remove access panel, lift pump,
and clear pump suction for
obstructions.
Replace sump pump IAW
procedures given in WP 0058 00.
Notify Direct Support
0030 00-7
