TM 10-7360-226-13&P
0002 00
CONTAINERIZED KITCHEN (WITH TRAILER)
EQUIPMENT DESCRIPTION AND DATA
Oven Assembly
The oven assembly, Figure 11, consists of an MBU-fired convection oven mounted on a mobile
base cabinet. Integral casters allow it to be easily moved between its operational and transport
locations. The assembly includes an integral exhaust gas oven fan and chimney pipe that
penetrates the fabric wall when positioned for operation. Positioning rails, permanently attached
to the floor at the assembly's operational location, position it with the correct clearance to
prevent damage to the walls from overheating.
EXHAUST FAN
OVEN
BASE ASSEMBLY
MBU
Figure 11. Oven Assembly.
Two refrigerators provide approximately 58 cubic feet of refrigerated storage. The refrigerators
use R-134a refrigerant, which is commercially available, environmentally safe, and non-ozone-
depleting.
Mobile Warming Cabinet
The mobile warming cabinet holds up to 10 full-size, 6-inch-deep steam table pans.
Removable/adjustable slides are provided in the cabinet. Each slide can hold two standard
pans. The cabinet has double doors with latches to hold them closed during transport and is
equipped with heavy-duty swivel casters, two with brakes. A thermometer on the control panel
displays the cabinet's internal temperature.
Hand Sink Assembly
The hand sink assembly, Figure 12, is a modular, self-contained hand washing station
consisting of a sink, faucet, water heater, pump, wastewater drain, liquid soap dispenser, and
paper towel dispenser integrated into a mobile aluminum cabinet. The cabinet has four swivel
casters, two with brakes, for easy movement between the transport and operational mode
locations.
Change 2
0002 00-10
