TM 10-7360-226-13&P
CONTAINERIZED KITCHEN (WITH TRAILER)
SERVICE UPON RECEIPT
THIS WORK PACKAGE COVERS:
Unpacking, inspection
INITIAL SETUP:
CK packed out
Maintenance Level
Operator/Crew
UNPACKING
The CK is shipped with all components and equipment packed inside the ISO container. To
unpack upon receipt, set up the kitchen as described in WP 0006 00.
INSPECTION
Inspect the equipment for damage incurred during shipment. Report any damage on SF 361,
Transportation Discrepancy Report.
Check the equipment against the Components of End Item and Basic Issue Items lists (WP
PAM 738-750.
Check to see that the generator's control panel door and right side door have been removed
(they should be, but may not be if the generator has been replaced). The doors may be in
position, but their hinges should be unbolted. The control panel door is accessible through the
food preparation area wall, and the right side door is accessible through the door next to the
cook center. Notify your supervisor if either door has not been unbolted the generator must
be removed from the CK to unbolt them.
Perform Service Upon Receipt for the generator in accordance with TM 9-6115-642-24.
Perform Service Upon Receipt for the MBUs in accordance with TM 10-7310-281-13&P.
END OF WORK PACKAGE
0015 00-1/2 Blank
