TM 10-8400-201-23
12-7. RESIZING - Continued
Table 12-1. Parka Liner Finished Measurements
SIZE
X-SMALL
SMALL
MEDIUM
LARGE
X-LARGE
TOLERANCE
INCHES
INCHES
INCHES
INCHES
INCHES
INCHES
1/2 chest 1/
25
27
29
31
33
± 3/4
Back length 2/
32 1/2
33
33 1/2
34
34 1/2
± 3/4
Sleeve length 3/
24
24 1/2
25
25 1/2
26
± 3/4
1/ Measurement shall be taken, with liner flat and front edges abutting, from the folded edge to folded edge at base of
armholes.
2/ Measured from top edge at neck to bottom edge along center back.
3/ Measure overedged side of back arm seam from top of overedge stitching at armhole to bottom of sleeve with no
tension applied to seam.
Table 12-2. Cold Weather Coat Liner Finished Measurements
SIZES
1/2 CHEST 1/
BACK LENGTH 2/
SLEEVE LENGTH 3/
INCHES
INCHES
INCHES
X-Short - X-Small
22 1/4
26
21
X-Short - Small
24 1/4
26 1/2
21 1/4
X-Short - Medium
26 1/4
27
21 1/2
X-Small
22 1/4
27 1/2
22
Small
24 1/4
28
22 1/4
Medium
26 1/4
28 1/2
22 1/2
Large
28 1/4
29
22 3/4
X-Large
30 1/4
29 1/2
23
Tolerance
±3/4
±1
±1/22
1/ 1/2 chest measurement taken with the liner flat and the front edges abutting, from folded edge to folded edge at the
base of armhole.
2/ Back length measurement taken along center back from edge of neck to bottom edge of liner.
3/ Measure overedged side of backarm seam from top of binding at armhole to bottom of binding at wrist with no tension
applied to the seam. The measurement is to be taken at the center portion of the seam allowance.
Change 5 12-9
