TM 10-8400-201-23
23-6. REPAIR OF CPU (UNDERSHIRT AND DRAWERS) - Continued
(4)
Slide Fasteners. Replace damaged, missing, or malfunctioning slide fastener with serviceable one.
(5)
Hook and Loop Pile Fastener Tapes. Replace damaged or missing Hook and Loop Pile Fasteners.
23-7. RESIZING.
After cleaning and repair, resize garments according to sizes listed in Table 23-1 and Table 23-2 below. When garments
vary in size from original marking, obliterate old marking and re-mark with proper size using indelible pencil or waterproof
ink. When actual measurements do not correspond to the size indicated, relabel to the next lowest size.
Table 23-1. Undershirt Finished Measurements
1/2 CHEST 1/
BACK LENGTH 2/
SLEEVE LENGTH 3/
1/2 NECK 4/
SIZE
IN (CM)
IN (CM)
IN (CM)
IN (CM)
32
14 1/2 (36.83)
26 1/4 (66.67)
18
(45.72)
8
(20.32)
34
15 1/2 (39.37)
27
(68.58)
18 1/2 (46.99)
8 1/4 (20.95)
36
16 1/2 (41.91)
27 3/4 (70.48)
19
(48.26)
8 1/2 (21.59)
38
17 1/2 (44.45)
28 1/2 (72.39)
19 1/2 (49.53)
8 3/4 (22.22)
40
18 1/2 (46.99)
29 1/4 (74.29)
20
(50.80)
9
(22.86)
42
19 1/2 (49.53)
30
(76.20)
20 1/2 (52.07)
9 1/4 (23.49)
44
20 1/2 (52.07)
30 3/4 (78.10)
21
(53.34)
9 1/2 (24.13)
46
21 1/2 (54.61)
31 1/2 (80.01)
21 1/2 (54.61)
9 3/4 (24.76)
48
22 1/2 (57.15)
32 1/4 (81.91)
22
(55.88)
10
(25.40)
Tolerance
1/2
+ 3/4, - 1/2
1/2
1/4
1/
Measure at base of armhole, from folded edge to folded edge.
2/
Measure along center back from collar seam to bottom of shirt.
3/
Measure along underarm seam from bottom of armhole to sleeve cuff.
4/
With slide fastener dosed, measure from folded edge to folded edge.
NOTE
All measurements shall be taken with the undershirt laid out flat, slide fastener dosed
and under no tension.
Change 4 23-6
