TM 10-8400-203-23
1-7. INSPECTION/CLASSIFICATION PROCEDURES - Continued
Cover, Canteen 2 Quart
LIN F30117
1.
Inspection Procedure: Inspect for rips, tears, holes, fraying, and loose or broken stitching. Check the outside for
“D” rings (2), plastic snap fastener, pocket, velcro, and metal grommet. Check the inside for damaged, loose, or
fraying synthetic fur. Inspect for stains, grease, oil, or other contaminants.
2.
Classification:
Code A.
Code B.
Code F.
Code H.
New and unused items possessing original appearance and serviceability.
Used items that are not suitable for Code A but are clean, complete, and in a serviceable condition
with all attached hardware.
Unserviceable items that can be repaired by replacing missing or damaged hardware, patching small
holes and tears (1 inch diameter or length), or replacing missing or broken stitching. Damage requir-
ing more than 4 patches or a 25 percent loss of synthetic fur is cause for salvage. Replacement of
plastic fastener with a metal snap is authorized. Minimal fraying is permissible.
Unserviceable items that are obviously scrap or cannot meet the criteria for Code F or are obviously
scrap.
Cover, Helmet, Camouflage Pattern
LIN F28747
1.
Inspection Procedure: Inspect item for rips, tears, holes, burns, snags, discoloration, oil, grease, and other contami-
nation.
2. Classification:
Code A.
New and unused items possessing original appearance and serviceability.
Code B. Used item that is not suitable for Code A but is undamaged, has minimal discoloration and is suitable
for issue as is.
Code F.
Item does not qualify for Code F; no repair is authorized.
Code H. Any item that is not suitable for issue as is (Code A or B) will be scrapped.
Change 3
1-11
