TM 10-8400-203-23
1-7. lNSPECTION/CLASSIFICATION PROCEDURES - Continued
Carrier, Club Police
No Asslgned LIN
1.
Inspection Procedure: Inspect for loose, missing, or broken seam threads. Check snap fasteners for serviceability
and proper mounting and that main body rivet assembly is not pulling through leather. Check entire body of carrier
for tears, slices, cracks, or pieces of the leather missing.
2. Classification:
Code A. New and unused item possessing original appearance and serviceability.
Code B. Used items that are not suitable for Code A but are complete, undamaged except for small cuts and
cracks that do not impair serviceability, are clean, and are suitable for issue as is.
Code F. Unserviceable items that can be repaired by replacing snap or minor seam stitching. Damage to
main body or main body rivet is criteria for Code H.
Code H. Unserviceable items that are obviously scrap or cannot meet the criteria for Code F.
Carrier, Intrenching Tool
LIN D11812
1 .
Inspection Procedure:
a.
Canvas Carrier--Inspect item for damaged or missing parts. Check for rips, tears, burns, oil, grease, or other
contaminants. Check for shrinkage where the flap will not close when the entrenching tool is inserted.
b. Plastic Carrier--Check for missing or damaged keepers and snaps. Check for rips or tears in the flap or case.
2. Classification (Plastic and Canvas Carriers):
Code A.
Code B.
Code F.
Code H.
New items with no evidence of use, missing parts, or damage.
Used items that are not acceptable for code A, but are complete, undamaged, clean, and suitable for
issue as is. Cuts or tears not impairing serviceability are acceptable for classification as Code B.
(1) Canvas--ltems that can be repaired by replacing missing or damaged parts, repairing small holes
or tears, 1 inch maximum. No more than 4 repairs per item. Shrinkage that can be repaired so the flap
can be fastened when the intrenching tool is installed is permissible. Bumed areas are not repairable.
(2) Plastic--Items that can be repaired by replacing missing or damaged parts. However, small
cracks or cuts on plastic material are not criteria for salvage.
Unserviceable items that are obviously scrap or cannot meet criteria of Code F.
Change 6
1-8.1/(1 -8.2 blank)