TM 10-8400-203-23
Change 10 26-17
When removing function switch, remove the foam inserts and earphone from the left earcup. Take note of the
order of assembly. Unplug the mini connectors on the wires coming from the switch and the cables. Remove
the hex nut from the switch on the outside of the earcup and slide the switch out through the inside of the
earcup. Re-assemble in reverse order and seal the switch inside the earcup with silicone sealant.
Figure 26-14. Headset Assembly
Function
Switch
Foam Inserts
Earphone
Earcup
Mini-connectors
Hex
Nut
Cables
26-8 REPAIR - Continued
