TM 9-1005-237-23&P
2-8. PREVENTIVE MAINTENANCE CHECKS AND SERVICES. (cont)
Table 2-2. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES
QUARTERLY SCHEDULE (Cont)
Item
No.
9
10
11
12
13
14
2-8
Item To Be
Inspected
M6 Bayonet-
knife and M7
Bayonet-knife
(cont)
Procedures
Inspect M6 lock-release lever for
bends and wear.
Inspect compression helical spring
for kinks, set and breaks.
Inspect spring pin for burrs or
wear
Inspect all parts for rust/corro-
sion
Not Fully Mission
Capable If:
D - Lock-release
lever is bent or
worn and not
fully functional
D - Compression
helical spring
is kinked, set
or broken
D - Spring pin
doesn’t retain
its associated
part
SH - part is
rusted/corroded
M10 bayonet-
knife scabbard
Check for cracks, cut/torn fabric,
missing lace and function of snap.
Cracks 1/2 inch or less are not
cause for repair.
Check metal parts for damage or
corrosion.
D - Crack is over
1/2 inch long or
snap does not
function
SH - Cuts/tears
in fabric over 1/4
inch deep, or
missing lace
D - Part is not
functional
SH - Part is
corroded
I
