TM 9-1005-237-23&P
2-9.A. M6 BAYONET-KNIFE AND M7 BAYONET-KNIFE--MAINTENANCE INSTRUCTIONS (Cont).
REASSEMBLY
1. For M6 bayonet only, if required, install compression helical spring
lock-release lever (2) on blade assembly (3).
2. Drive in spring pin (4).
(1) and
3. Position LH grip (1) and RH grip (2) on blade assembly (3).
NOTE
On the M7 Bayonet-knife there are two lockwashers (5) to
install before the two grip screws.
4. Install two grip screws (4) as shown above.
2-16