TM 10-3510-224-13&P
0038 00
Washer Replace.
1. Prior to installation of a new washer/dryer, remove all packing materials in accordance with manufacturers
instructions.
2. Install the sheet metal adapter (1) on the new dryer using the retained clamp.
3. Remove the ground strip (2). From the electrical connection panel.
4. Install the power cord (3).
5. Connect the wastewater hose (4). Using the retained clamp.
6. Remove the four leveling feet (5).
3
2
1
5
4
7. Slide the assembled washer/dryer into position on the floor.
8. Remove the front panel (6) of the washer. Retain the securing hardware (15).
9. Slide the washer unit over the stops (7) and out of the frame to gain access to the mounting holes (8).
10. Align the dryer and frame assembly over the mounting holes in the floor (9).
11. Install the retained bolts (10) to secure the dryer and frame assembly to the floor.
0038 00-5