TM 10-3510-224-13&P
0005 00
PREPARE FRESHWATER COMPONENTS FOR SHIPMENT.
Using municipal water:
1. Shut off the fresh water supply at the source. Disconnect the 2 freshwater hose (1) from the freshwater inlet panel
(2) on the utility wall.
2. Connect the garden hose to the hose fitting (3) located at the end of the supply line (behind washer/dryer #6) and
open (handle in line with water line) the ball valve (4) to let the system drain.
3. Leave the ball valve (4) open after system has drained. Disconnect the garden hose, drain and coil it, connect the
ends together and set it aside.
4. Disconnect the 2 freshwater hose (1) from the water source, drain and coil it, and set it aside.
1
4
3
2
0005 00-42