NAVAIR 01-1A-509-3
01 March 2005
TM 1-1500-344-23-3
TO 1-1-689-3
6-2.11. EQUIPMENT HINGES AND LATCHES.
Inspect hinges and latches on black boxes, access
doors, covers or housings, for corrosion and condition
Compound, Corrosion Preventive 26
of preservatives/ lubricants. Treat as follows:
MIL-DTL-85054
e. Prepare bare metal non-moving parts requiring
no lubrication in accordance with Volume II (Navy and
Solvent, Degreasing
7
Army) or TO 1-1-691 (Air Force). When environmental
MIL-PRF-680
conditions or time do not permit, preserve surfaces
requiring no lubrication with a thin film of Corrosion
a. Clean affected areas with Cleaning Cloth,
P r e v e n t i v e Compound, MIL-DTL-85054, Clear
CCC-C-46 Class 7 (Volume IV or V, Chapter 2)
(Amlguard) (Volume IV or V, Chapter 2).
dampened with Degreasing Solvent, MIL-PRF-680
Type III.
WARNING
b. Remove corrosion with Abrasive Mat, A-A-58054
Do not use Corrosion Preventive Compounds,
Type I Grade A or B (Volume IV or V, Chapter 2) or
MIL-C-81309,
MIL-DTL-85054,
Abrasive Cloth 320 Grit (Volume IV or V, Chapter 2),
MIL-PRF-16173, or Lubricating Oil, General
as appropriate.
P u r p o s e Preservative, MIL-PRF-32033,
around oxygen or oxygen fittings since fire/
explosion may result.
Alcohol, Isopropyl
6
TT-I-735
Compound, Corrosion Preventive
3
c. Wipe residue with Cleaning Cloth, CCC-C-46
Water-Displacing
Class 7 (Volume IV or V, Chapter 2) dampened with
MIL-C-81309
I s o p r o p y l Alcohol, TT-I-735 (Volume I V or V,
Chapter 2), and allow to dry.
f. Spray hinges and latches with Water Displacing
Corrosion Preventive Compound, Ultra-Thin Film,
MIL-C81309 Type II (Volume IV or V, Chapter 2).
Coating, Chemical Conversion
10
MIL-DTL-81706
Oil, Lubricating
20
CAUTION
General Purpose
MIL-PRF-32033
E x e r c i s e care when using Chemical
Conversion Material, MIL-DTL-81706, near
g. A p p l y Lubricating Oil, General Purpose
electronic hardware. It can cause corrosion of
Preservative, MIL-PRF-32033 (Volume IV or V,
the delicate electronic devices if they are not
Chapter 2), on moving parts.
suitably protected.
6-2.12. SHELVES, BULKHEADS, AND CREVICES.
d. After corrosion is removed, aluminum surfaces
Inspect shelves, bulkheads, crevices and corners for
shall be treated with Chemical Conversion Material
signs of corrosion. Examine these areas for deteriorated
MIL-DTL-81706 Class IA (Volume IV or V, Chapter 2),
paint that is cracked, chipped, or peeled. Treat in
in accordance with Volume II (Navy or Army) or TO
accordance with paragraph 6-2.2.
1-1-691 (Air Force) and paragraphs 5-3.1.1. and
5-3.1.2.
6-7