NAVAIR 01-1A-509-3
01 March 2005
TM 1-1500-344-23-3
TO 1-1-689-3
b. Remove corrosion products from metal surfaces
(Volume IV or V, Chapter 2), on metal surfaces and
with Abrasive Mat, A-A-58054 Type I (Volume IV or V,
wipe with cleaning cloth, CCC-C-46 Class 7 (Volume IV
C h a p t e r 2 ) , or Cleaning and Polishing Pad,
or V, Chapter 2). Take steps not to get preservative on
Non-Abrasive (Volume IV or V, Chapter 2) as
plastic faceplate.
appropriate.
g. Clean and preserve toggle, rotary, and pushbutton
switches in accordance with paragraph 6-3.7.
Solvent, Degreasing
7
MIL-PRF-680
Detergent, General Purpose
5
c. Clean affected area with Degreasing Solvent,
MlL-D-16791
MIL-PRF-680 Type III (Volume IV or V, Chapter 2).
Apply with Cleaning Cloth, CCC-C-46 Class 7
h. Clean control box faceplates with solution of one
(Volume IV or V, Chapter 2).
(1) ounce (2 tablespoons) Detergent, Liquid, Nonionic,
MIL-D-16791 Type I (Volume IV or V, Chapter 2), in
one (1) gallon of fresh water. Apply and wipe with
Flannel Cloth, CCC-C-458 Type II (Volume IV or V,
Chapter 2). Polish glass with clean flannel cloth.
Alcohol, Isopropyl
6
TT-I-735
i. Clean and preserve cockpit and control box
electrical connectors in accordance with paragraphs
d. Follow with application of one part Isopropyl
6-3.11.1. through 6-3.11.4.
Alcohol, TT-I-735 (Volume IV or V, Chapter 2), to one
part deionized water. Wipe clean with Cleaning Cloth,
6-2.8. TERMINAL BOARDS, JUNCTION BOXES,
CCC-C-46 Class 7 (Volume IV or V, Chapter 2).
RELAY BOXES, AND CIRCUIT BREAKER PANELS.
Remove covers and access panels. Treat as follows:
e. Paint as required by equipment specific manuals.
WARNING
Ensure that all electrical power is disconnected
Compound, Corrosion Preventive
3
from the aircraft and all electrical systems in
Water-Displacing
the aircraft are deactivated. Disconnect all
MIL-C-81309
batteries.
WARNING
a. External surfaces:
Do not use Corrosion Preventive Compounds,
(1) Treat in accordance with paragraph 6-2.2.
MIL-C-81309,
MIL-DTL-85054
or
MIL-PRF-16173, or Lubricating Oil, General
(2) Prepare surface and paint in accordance
P u r p o s e Preservative, MIL-PRF-32033,
with Volume II (Navy), TO 1-1-8 (Air Force), and TM
around oxygen or oxygen fittings since fire/
55-1500-345-23 and TB 43-0118 (Army).
explosion may result. Corrosion Preventive
Compounds, MIL-C-81309 and MIL-L-87177
are flammable and toxic.
Compound, Corrosive Preventive 26
CAUTION
MIL-DTL-85054
Corrosion Preventive Compounds may cause
(3) When environmental conditions or time do
cracking or crazing of plastics.
not permit painting, preserve with a thin film of Corrosion
P r e v e n t i v e Compound, MIL-DTL-85054, Clear
f. Brush or spray Water Displacing Corrosion
(Amlguard) (Volume IV or V, Chapter 2).
P r e v e n t i v e Compound, MIL-C-81309 Type I I
6-5