01 March 2005
NAVAIR 01-1A-509-3
TM 1-1500-344-23-3
TO 1-1-689-3
6-5.3. ELECTRONIC EQUIPMENT SHOCK MOUNT
BONDING PRESERVATION. This type of electrical
bonding uses a bonding wire (jumper assembly) or
Compound, Corrosion Preventive
3
strips of aluminum/copper. The following corrosion
Water-Displacing
prevention method applies:
MIL-C-81309
6-5.2. PRESERVATION. Apply Water Displacing
Corrosion Preventive Compound, MIL-C-81309 Type III
(Volume IV or V, Chapter 2) according to Table 9-1.
Alcohol, Isopropyl
6
The following procedures apply for bonding/grounding
TT-I-735
connections that are not environmentally protected
continually.
a. Clean disassembled bonding connection by
wiping with a cloth, Non-Woven Wiping Cloth, A-A-162
Type I Class 1 or 2 (Volume IV or V, Chapter 2),
dampened with Isopropyl Alcohol, TT-I-735 (Volume IV
or V, Chapter 2).
Compound, Corrosion Preventive
3
Water-Displacing
b. Allow to air dry.
MIL-C-81309
c. Assemblebondingconnection.
Compound, Corrosion Preventive
8
MIL-PRF-16173
a. For bonding/grounding connections that require
fairly frequent disassembly, preserve the connection
Compound, Corrosion Preventive
3
area by applying Corrosion Preventive Compound,
Water-Displacing
MIL-C-81309 Type II (Volume IV or V, Chapter 2),
MIL-C-81309
followed by a coating of Corrosion Preventive
Compound, MIL-PRF-16173 Grade 4 (Volume IV or V,
d. Apply Water Displacing, Corrosion Preventive
Compound, MIL-C-81309 Type II (Volume IV or V,
Chapter 2), over jumper assembly.
Sealing Compound
2
Corrosion Inhibitive
Sealing Compound
2
MIL-PRF-81733
Corrosion Inhibitive
MIL-PRF-81733
e. For connections seldom requiring disassembly,
coat the entire connection with Corrosion Inhibiting
Sealing Compound
19
Sealant, MIL-PRF-81733 Class 1, Grade A Type II - 1/
MIL-PRF-8516
2 (Volume IV or V, Chapter 2) using a sealant gun; and
smooth out with a Spatula, ZZ-S-70 (A-A-227)
b. F o r connections that seldom require
(Volume IV or V, Chapter 3) to ensure complete
disassembly, preserve with the more permanent and
coverage. This sealant will cure to a tack free state in
abrasion-resistant Sealing Compound, MIL-PRF-8516
10 hours.
(Volume IV or V, Chapter 2), applied with a Spatula,
A-A-277 (Volume IV or V, Chapter 3).
6-42
