TM 10-3510-208-34
b. Disassembly.
(1) Jackshaft, Washer Drive (Eidal Model
ELT9T).
(a) Remove lubrication line (1, fig. 7-
15).
Remove elbow (2). Remove adapter (3) and bushing
(4).
(b) Remove lubrication line (5).
Remove adapter (6) and bushing (7).
(c) Remove belt (8).
(d) Remove belt guard (9) and
remove fitting (10) and grease block (11) from guard.
(e) Remove pulley (12).
(f) Remove screws (13) and washers
(14) securing the hub, and remove hub (15).
(g) Remove the pulley (16). Remove
bolts (17), washers (18) securing the hub and remove
hub (19).
(h) Slip the pillow blocks (20 and 21)
from the jackshaft (22).
7-30
