TM 10-3510-208-34
Figure 7-18. Washer motor air cylinder, removal and installation.
b. Disassembly.
(1) Remove the cotter pin (1, fig. 7-19) and
remove the plug (2) from the head (5).
(2) Remove the stud (3) and elbow (4) from
the head (5).
(3) Remove the head (5), gasket (6) and
body (7).
(4) Remove the nut (8) from the rod end
and remove the retainer (9), seal (10), collar (11),
washer (12), pad (13), washer (14), seat (15), spring (16)
and seat (17) from the rod (23).
(5) Remove the setscrew (18) and remove
the clevis (19) and nut (20) from the rod.
(6) Remove the setscrew (21) and nut (22)
and remove the rod (23) from the head (24).
7-37