TM 10-3510-208-34
Figure 2-7 DC volts scale (sheet 2 of 3).
1. Set FUNCTION switch to "DIRECT". (RANGE switch can be at any position).
2. Put black lead in "-DC/ AC/OHMS" jack.
3. To measure 24 volts DC, plug red lead into "50V" jack on left side of meter. (If measuring less
than 10 volts DC, use "10V" jack. If measuring less than 2.5 volts DC, use "2.5V" jack).
(c)
Simpson 160.
1. Connect black lead to "COM-" jack.
2. Connect read lead to " " jack.
2-12
