TM 10-3510-208-34
2.
Put black lead in "-DC/
AC OHMS” jack (B. fig. 2-10 sheet 2 of 3).
3.
Put red lead in "250V"
jack on right side of meter.
(c)
Simpson 160.
1.
Put black lead In "COM-"
jack.
2.
Put red lead in " " jack.
3.
Set
selector
switch
to
"V/AC 250" position.
Figure 2-10. AC volt scale (sheet 3 of 3).
(2)
To measure 115 AC voltage, do the
following steps:
(a)
Set up multimeter (fig. 2-10).
(b)
With all three multimeters,
connect one probe to one side of the circuit and the
other probe to the other side. The example (fig. 2-11)
shows 115 volts AC being measured across an AC light
circuit.
2-18
