TM 10-3510-209-24
2-28. EXTRACTOR ASSEMBLY (CONT)
REPAIR (Cont)
c.
Remove drivebelt (22).
2.
Install new drivebelt (22) as follows:
a.
Install drive belt (22) in correct position.
b.
Position motor hanger (19) and swing tension bolt (21) with spring (20) into slot of hanger.
c.
Check for proper belt tracking and tension.
d.
Slide belt guard (18) back into position and secure with lockwasher (17) and screw (16).
NOTE
FOLLOW-ON MAINTENANCE:
Install work platform in transport position
(TM 10-3510-209-10).
2-105
