TM 10-3510-209-24
2-30. EXTRACTOR DRIVE MOTOR (CONT)
REMOVAL (Cont)
2.
Tag and disconnect four electrical wires (3) from
motor switch (4).
3.
Remove plastic nut (5), conduit nut (6), and
conduit (7) from box (8).
WARNING
Electric motor is heavy and awkward
to
handle.
Use
correct
lifting
procedures, indicated lifting devices,
and/or
assistance
from
other
personnel to avoid injury.
4.
Lift motor (9) with mount (10) upward and out of
hinge pin holes in rear leg (11).
5.
Remove two capscrews (12), lockwashers (13),
and mount (10) from motor (9).
INSTALLATION
1.
Install mount (10) on motor (9) and secure with
two capscrews (12) and lockwashers (13).
2.
Lift motor (9) with mount (10) and install in hinge
pin holes of rear leg (11).
3.
Install conduit (7) with electrical wires (3) in box
(8). Install conduit nut (6) and plastic nut (5).
4.
Connect four electrical wires (3) to motor switch
(4). Remove tags.
5.
Install electrical box cover (2) on box (8) and
twist two cam locks (1).
NOTE
FOLLOW-ON MAINTENANCE:
Install drivebelt (para 2-28).
2-108
