TM 10-3510-209-24
2-50. WATER PUMP AND MOTOR ASSEMBLY (CONT)
REPAIR (Cont)
NOTE
The water pump and motor is an integral part of the water pump assembly, making
it necessary to replace both assemblies if a defect occurs to either assembly.
4.
Repair water pump and motor.
a.
Disconnect wires in motor power junction
box (refer to REPAIR paragraph 3).
b.
Disconnect
conduit
at
motor
power
junction box (refer to REPAIR paragraph
3).
c.
Remove inlet water strainer (refer to
SERVICE).
d.
Remove water outlet assembly (refer to
REPAIR paragraph 1).
e.
Remove four nuts (45), lockwashers (46),
flat washers (47), and screws (48).
Remove water pump assembly (49) from
frame (50).
f.
Position water pump assembly (49) on frame (50) and secure with four screws (48), flat washers (47),
lockwashers (46), and nuts (45).
g.
Install water outlet assembly (refer to REPAIR paragraph 1).
h.
Install inlet water strainer (refer to SERVICE).
i.
Connect conduit to motor power junction box (refer to REPAIR paragraph 3).
j.
Connect wires in motor power action box (refer to REPAIR paragraph 3).
2-181
