TM 10-3510-209-24
3-19. WATER HEATER (CONT)
REMOVAL (Cont)
11.
Remove eight capscrews (16), lockwashers
(17), flat washers (18), and four brackets (19).
WARNING
Components of the water heater are
heavy and may be awkward to
handle. Use correct lifting devices
and/or
assistance
from
other
personnel to avoid injury.
12.
Remove-water heater (20) from trailer.
INSTALLATION
WARNING
Components of the water heater are
heavy and may be awkward to
handle. Use correct lifting devices
and/or
assistance
from
other
personnel to avoid injury.
1.
Install water heater (20) on trailer bed. Line up
holes of heater skid with threaded holes in
trailer.
2.
Install eight capscrews (16), lockwashers (17), flat washers (18), and four brackets (19).
3.
Install conduit nut (13), conduit (14), and wires (15) in control box (2).
4.
Loosen thumbscrew (3) and remove cover (4).
5.
Loosen two screws (5) and remove PC board (6).
6.
Connect wire (12) and install screw (11). Remove tags.
7.
Connect six wires (10), install screws (9), and remove tags. See FIGURE 2-5.
8.
Install limit switch (8) in control box (2) and secure with two screws (7).
9.
Install PC board (6) and tighten two screws (5).
10.
Install cover (4) and tighten thumbscrew (3).
11.
Install new wire ties (1) as needed and bundle wires neatly in circuit box (2).
12.
Close and latch cover on circuit box (2).
3-86
