TM 10-3510-209-24
3-27. DRYER EXHAUST MOTOR AND FAN ASSEMBLY (CONT)
REMOVAL (Cont)
2.
Remove two screws (1) and cover (2) from connector box (3).
3.
Tag and disconnect motor wires (4) from inside connector box (3).
4.
Remove two screws (5) and connector box (3) from motor (6).
5.
Remove conduit nut (7) from elbow (8) and remove conduit (9) from connector box (3).
6.
Remove four nuts (10), washers (11), and motor (6) from dryer (12).
REPAIR
Repair of the motor consists of replacing damaged or defective components.
INSTALLATION
1.
Install motor (6) on dryer (12) and secure with four nuts (10) and washers (11).
2.
Install elbow (8), conduit (9), and conduit nut (7) in connector box (3).
3.
Install connector box (3) and two screws (5) on motor (6).
4.
Connect wires (4) inside connector box (3). Remove tags.
5.
Install cover (2) and two screws (1) on connector box (3).
3-124
