TM 10-3510-209-24
3-28. DRYER TUMBLER DRIVE MOTOR AND GEARBOX (CONT)
REMOVAL (Cont)
e.
Loosen setscrew (11) on the motor side of
coupling (12).
f.
Remove four bolts (13), flat washers (14),
lockwashers (15), nuts (16), and motor
(17) with bracket.
g.
Remove key (18) from motor shaft (19)
and slide motor (17) away from coupling
(12).
h.
Save coupling cushion (20) for future use.
2.
Remove gear box.
WARNING
High voltage is present on this
equipment.
Do
not
perform
maintenance with power on. Death
or serious injury may result.
a.
Remove electrical power from the dryer.
b.
Remove two bolts (7), flat washers (8),
nuts (9), and coupling guard (10).
3-127
