TM 10-3510-209-24
3-28. DRYER TUMBLER DRIVE MOTOR AND GEARBOX (CONT)
INSTALLATION
1.
Install drive motor.
NOTE
Align the key and keyway on the motor shaft with the keyway in the coupling
before installing the replacement motor.
a.
Install key (18) on motor shaft (19) and slide motor shaft into coupling (12). Place coupling cushion (20)
inside coupling.
b.
Install motor with bracket (17), four bolts (13), flat washers (14), lockwashers (15), and nuts (16).
c.
Tighten setscrew (11) on the motor side of coupling (12).
3-130