TM 10-3510-220-10
Table 3-2. Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
13. WASHER FILLS WITH WRONG TEMPERATURE OF WATER.
Step 2.
Check for proper thermostat setting on water heater.
a.
If setting is incorrect, refer to malfunction 2, step 2.
b.
I f c o r r e c t t e m p e r a t u re
cannot be obtained, notify your
supervisor.
14. WASHER FAILS TO TUMBLE.
Step 1.
Check positions of switches on controller.
a.
Position the switches to effect proper tumbling action.
b.
If washer still fails to tumble, proceed to next step.
Step 2.
Check to ensure washer door is closed.
a.
If the door is not closed, close the door and secure.
b.
If door is closed and secure, proceed to next step.
WARNING
Remove rings, bracelets,
wristwatches, and neck chains
before working around or on the laundry unit. Jewelry can
catch on equipment and cause injury, or may short across an
electrical circuit and cause severe burns or electrical shock.
Ensure circuit breakers are in the OFF position.
Step 3.
Check drive mechanism for missing or damaged belt.
Report missing or damaged belts to your supervisor.
Step 4.
Check for blown fuses inside of controller. Replace suspect fuses
with a known good fuse.
If problem still persists, notify your supervisor.
3-12
