TM 10-3510-220-24
3-11. WASHER CONTROLLER ASSEMBLY
This task covers:
a. Test
b. Service c.
Adjustment
d. Repair
e. Removal f. Installation
INITIAL SETUP
Equipment Condition
Tools
TM 10-3510-220-10, Tarp assembly removed.
General mechanic’s tool kit
General Safety Instructions
WARNING
Materials/Parts
High voltage is present on this equipment. Do
Tiedown strap (Item 11, App C),
Cleaning solvent (Item 10,
not perform maintenance with power on.
App C)
Death or serious injury may result.
Wiping cloth (Item 13, App C)
TEST
1.
2.
3.
4.
5.
NOTE
A standardized test has not been developed for the military design of
the washer.
Test operate all cycles and functions, both manual and automatic, of washer.
Refer to TM 10-3510-220-10.
Observe each function for proper and complete action.
Check for incorrect timing or water temperature.
Refer to malfunctions in troubleshooting section, (para 3-6) and perform corrective action.
WARNING
High voltage is present on this equipment. Do not perform maintenance
with power on. Death or serious injury may result.
Use a multimeter and check each wire run from end to end. Check continuity of wound coils on
each relay or magnetic switch. Replace defective wires or coils. Refer to Figure 2, Appendix E.
3-31
