TM 10-3510-220-24
3-15. EXTRACTOR ASSEMBLY (CONT)
REPAIR (Cont)
e.
g.
h.
i.
j.
k.
l.
Remove two snaprings (34) from
brake arm pivot (38) and anchor
stud (39).
Use brake arm (37) and manually
push in brake solenoid plunger (36),
releasing brake pressure.
Pry off brakeshoe (33) at pivot
points and clean the pivot points
with a clean cloth.
Install new brakeshoe (33) with
lubrication points (35) aligned in
the direction shown and install
snaprings (34).
Lubricate the brakeshoe pivot
points. Refer to LO 10-3510-220-12.
Adjust brakeshoe. Refer to
paragraph 2-29.
Install curb (31) on base (32).
Secure with capscrew (25),
lockwasher (26), drain clamp (27),
two brass bolts (28), flat washers
(29), and gaskets (30).
3-58
