TM 10-3510-220-24
3-15. EXTRACTOR ASSEMBLY (CONT)
REPAIR (Cont)
m.
Lift basket (24) and gently install in
extractor. Turn basket slightly
until it engages with hex drive.
n.
Connect extractor drain line. Refer
to TM 10-3510-220-10.
o.
Lower extractor lid (23) to operating
position.
2.
Remove and replace brake solenoid.
WARNING
High voltage is present on this equipment.
Do not perform maintenance with power
on. Death or serious injury may result.
a.
Set extractor circuit breaker on the
electrical power panel to the OFF
position.
b.
Open extractor lid (23).
c.
Disconnect electrical drain. Refer to
TM 10-3510-220-10.
WARNING
Components of the extractor assembly are
heavy and may be awk ward to handle.
Use correct lifting procedures, lifting
devices, and/or assistance from other
personnel to avoid injury.
d.
Manually lift out basket (24).
e.
Refer to REPAIR, step 1d, and
remove curb from base.
3-59
