TM 10--3510--221--10 0024 00--5 LAUNDRY ADVANCED SYSTEM PREVENTIVE MAINTENANCE CHECKS AND SERVICES -- Continued 0024 00 TABLE 1. Operator PMCS. ITEM NO. INTERVAL MAN-- HOUR ITEM TO BE CHECKED OR SERVICED PROCEDURE EQUIPMENT NOT READY/ AVAILABLE IF: 1 Before Fuel supply Check for adequate supply of fuel (JP--8) in external container (1). Fuel supply is < 350 gals Ensure supply hoses (2) are not damaged and are connected at external container and heater (3). Supply hoses are damaged or not connected 2 Before Water supply Check for adequate supply of water in external container (4). Water supply is < 500 gals Ensure supply hoses (5) are not damaged and are connected at external container, water supply pump (6), and LADS piping connections (7). Supply hoses are damaged or not connected 3 Before Water supply pump Check electrical cable (8) on water supply pump (6) for damage and proper connection at junction box (9). Electrical cable is damaged or not connected 4 Before Water pumps Ensure petcocks (10) are closed. Petcocks are open Ensure pump cover (11) is properly installed. Cover is not properly installed 5 Before Water plumbing Check water plumbing (12) for evidence of leakage. Any class III leak is detected Ensure shut off valve (13) for utility hose is closed. Valve is not closed 6 Before Thermal fluid plumbing Check thermal fluid plumbing (14) for evidence of leakage. Any class II leak is detected 7 Before Heater Ensure blower air inlet screen (15) is not blocked with debris. Screen is blocked Ensure exhaust duct (16) is not blocked with debris. Exhaust duct is blocked Check fuel lines (2) for evidence of leakage. Any class I leak is detected 8 Before Dryer air inlet screens Ensure dryer inlet screens (17) are installed and there is no debris blocking air flow. Screens are not installed or are blocked 9 Before Dryer air outlet guards Ensure dryer blower outlet guards (18) are not blocked with debris. Guards are blocked