TM 10--3510--221--10
0008 00--5/6 blank
LAUNDRY ADVANCED SYSTEM DESCRIPTION AND USE OF
OPERATOR CONTROLS AND INDICATORS -- Continued
0008 00
HEATER CONTROLS AND INDICATORS
Figure 4 shows the location of the controls and indicators found on the heating system. Table 4 describes the use of
these controls and indicators.
1
2
3
4
Figure 4. Location of Heating System Controls and Indicators.
Table 4. Heating System Controls and Indicators.
INDEX
DESCRIPTION
TYPE
FUNCTION
1
PRIME PUMP ON/OFF
Momentary
Toggle Switch
Used to prime heater fuel system.
2
FUEL PUMP PRESSURE
Gage, 0--200
PSIG
Used to verify fuel pump is primed and proper fuel
pressure is available to run heating system.
3
BURNER FUEL PRESSURE
Gage, 0--400
PSIG
Used to verify fuel pressure is available to support
heater ignition.
4
FP300 RESET
Pushbutton
Switch
Used to reset heater flame programmer when a
heating system related failure is displayed.
