TM 10--3510--221--24
0045 00--1/2 blank
WATER VISIBLE AT REAR SEAL OF DRUM
0045 00
THIS WORK PACKAGE COVERS:
Troubleshooting Water Visible At Rear Seal Of Drum
INITIAL SETUP:
Maintenance Level
Equipment Conditions
Unit
Power must be applied at main control
enclosure (WP 0010 00).
1. Start or continue a laundry cycle (TM 10--3510--221--10).
2. Monitor drum during extract step.
Is water level in drum above door window?
YES Pause laundry cycle. Go to WATER NOT DRAINING FROM DRUM FAULT (WP 0044 00).
NO Go to step 3.
3. Pause laundry cycle.
4. Position SW2 to OFF then back to ON.
5. Using maintenance menu rotate drum at TUMBLE CW.
6. Lubricate rear drum seal (TM 10--3510--221--10).
7. Exit maintenance menu then continue laundry cycle (TM 10--3510--221--10).
8. Monitor rear drum seal during extract step.
Is water leaking out of drum shaft seal?
YES Replace drum shaft seal (WP 0260 00).
NO Return to normal operation.
END OF WORK PACKAGE
