TM 10--3510--221--24
0153 00--1
OUTLET B WATER CONTROL VALVE
REPLACEMENT
0153 00
THIS WORK PACKAGE COVERS:
Removal, Installation
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Sealant, Pipe Thread (Item 6, WP 0271 00)
Tags (Item 9, WP 0271 00)
Tape, Anti--Seizing (Item 10, WP 0271 00)
Gasket, Sanitary, (Qty 3) (Item 7, WP 0275 00)
Strap, Tie Down (Item 14, WP 0275 00)
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
Water must be drained from water tanks
(WP 0114 00).
Air pressure must be vented (WP 0113 00).
REMOVAL
1. Remove inlet B manifold (WP 0151 00).
2. Remove inlet A manifold (WP 0152 00).
3. Remove cap (1) from outlet B manifold (2).
4. Tag and disconnect tubes (3) from elbows (4) on three control valves (5).
5. Loosen clamp (6) then pull hose (7) off of outlet B manifold (2).
6. Cut tiedown straps securing tubes (3) to outlet B manifold (2).
7. Remove three clamps (8), then pull outlet B manifold (2) out from under water tanks (9).
8. Remove and discard gaskets (10) from outlet B manifold (2).
9. Unthread faulty control valve (5) from outlet B manifold (2).
10. Unthread adapter (11) from control valve (2).
11. Unthread two elbows (4) from control valve (2).
12. Clean anti--seizing tape from threads of elbows (4).
13. Clean pipe thread sealant from threads of outlet B manifold (2), and adapter (11).
