TM 10--3510--221--24
0176 00--1
FUEL INLET FILTER SERVICING
0176 00
THIS WORK PACKAGE COVERS:
Fuel Inlet Filter Element Replacement
INITIAL SETUP:
Maintenance Level
Materials/Parts
Unit
Rag, Wiping (Item 4, WP 0271 00)
Tools and Special Tools
Equipment Conditions
Tool Kit, General Mechanics (Item 1, WP 0272 00)
LADS power shut off at main control
enclosure (WP 0112 00).
REMOVAL
WARNING
The fuels used on the heating system are highly explosive. DO NOT smoke or use open
flame when performing maintenance. Flames and explosion could occur resulting in severe
personal injury or death.
1. Disconnect fuel hoses (1 and 2) from quick--connect fittings (3 and 4).
2. Remove center bolt (5), then filter bowl (6) from filter housing (7).
3. Remove filter element (8) from filter bowl (6).
4. Remove bowl gasket (9) from filter bowl (6).
5. Remove center bolt gasket (10) from filter housing (7).
6. Wipe inside of filter bowl (6) and filter housing (7) with a clean rag.
